CFP Carpentry & Fire Prevention were asked to carry out fire door remedial works at a property in Hampshire, following concerns around the gaps between the door leaf and frame.
The works focused on improving the condition and operation of the existing fire doors, including gap adjustments, fitting drop down seal devices and adjusting the door closers so the doors shut correctly.
These types of remedial works are often required when a fire door set is still serviceable but needs adjustment to bring it closer in line with expected fire door standards. CFP provides fire door remedial works, fire door surveys and fire door installation for residential blocks, managed properties and commercial buildings.
Fire Door Gap Adjustments
One of the key issues identified on this project was the gap around the doors and frames. The doors required adjustment to help achieve a consistent 2-4mm gap around the door set.
Maintaining suitable gaps is an important part of fire door performance. If gaps are too large, the door may not provide the intended protection in the event of a fire. On this project, the doors were adjusted carefully to improve the fit while retaining safe and smooth operation.
Drop Down Seal Devices Fitted
Drop down seal devices were also fitted to help close the gap at the bottom of the doors. These seals are designed to activate when the door closes, helping to improve the seal between the bottom of the door and the floor finish.
This is a common remedial solution where the bottom gap is excessive but the existing door set can still be retained.
Works Carried Out
- Fire door gaps checked around the door and frame
- Door gaps adjusted to help achieve 2-4mm around the doors
- Drop down seal devices fitted to the bottom of the doors
- Door closer adjustments carried out
- Doors checked to make sure they closed correctly
- General remedial works completed to improve fire door performance
Door Closer Adjustments
The door closers were adjusted as part of the remedial works. A fire door should close fully and reliably from different opening angles, without sticking, dragging or failing to latch where required.
Small adjustments to door closers can make a significant difference to day-to-day use and compliance, especially in residential or managed buildings where fire doors are used frequently.
Fire Door Remedial Works Across Hampshire
CFP works with landlords, managing agents, property owners and commercial clients across Hampshire and the South Coast, helping to inspect, repair and improve fire doors where issues have been identified.
Where replacement is not required, remedial works can often resolve common issues such as excessive gaps, damaged seals, poor closing action, hinge problems or missing fire door signage.
For properties in the surrounding area, CFP also provides local fire door services in nearby locations including Southampton, Portsmouth and Winchester.
Fire Door Repairs and Compliance Support
This Hampshire project is a good example of targeted fire door remedial works being used to improve existing door sets rather than replacing them unnecessarily.
By adjusting the gaps, fitting drop down seals and setting the door closers correctly, the doors were left operating more effectively and with improved fire safety performance.
To arrange a similar inspection or repair, visit our fire door remedial works page or contact CFP Carpentry & Fire Prevention.
