CFP Carpentry & Fire Prevention recently completed fire door remedial works to a flat entrance door at a property in Poole.
The existing door required adjustment because the gaps between the door leaf and frame were not within the required 2–4mm range. The existing hinges were also replaced with new Grade 13 fire rated hinges as part of the remedial work.
Rather than replacing the complete door set, our team was able to carry out targeted fire door remedial works to improve the fit of the existing flat entrance door.
Adjusting the Fire Door Gaps
One of the main issues identified with the door was the inconsistent gap between the door leaf and frame.
To correct this, the architraves were carefully removed so that the existing frame could be accessed and adjusted.
Hardwood wedges were then used to reposition the frame and bring the gaps around the door into the required 2–4mm range.
The photographs from the project show the gaps being measured at different points around the door to check the alignment following the remedial works.
New Grade 13 Fire Rated Hinges Installed
The existing hinges were removed and replaced with new Grade 13 fire rated hinges.
Correctly fitted hinges are an important part of a fire door assembly, supporting the weight of the door while helping it sit correctly within the frame.
Replacing the hinges also formed part of the wider adjustment process, allowing the door to be rehung correctly after the frame had been repositioned.
Fire Door Remedial Works Included
- Assessment of the existing flat entrance door
- Removal of the surrounding architraves
- Adjustment of the existing door frame
- Installation of hardwood wedges to reposition the frame
- Adjustment of door gaps to between 2mm and 4mm
- Removal of the existing hinges
- Installation of new Grade 13 fire rated hinges
- Final checks of the door alignment and gaps
Why Fire Door Gaps Matter
The gaps around a fire door are an important part of its overall installation.
If the gaps become too large or inconsistent, remedial work may be required to improve the fit between the door and frame. In some cases this can be achieved by adjusting the existing frame rather than replacing the complete door set.
On this project in Poole, removing the architraves gave our team access to the frame so it could be repositioned using hardwood wedges before the door was rehung and checked.
Fire Door Remedial Works in Poole
CFP provides fire door remedial services for flats, apartment blocks, HMOs, commercial premises and other properties throughout Poole and the surrounding areas.
Depending on the condition of the existing door set, remedial works can include adjusting excessive gaps, replacing unsuitable hinges and ironmongery, installing seals, correcting door alignment and making adjustments to help the door operate correctly.
Where an existing door is beyond economical repair, CFP can also provide complete fire door installation.
Need a Fire Door Repaired in Poole?
If a fire door at your property has excessive gaps, damaged components or requires adjustment following an inspection, CFP Carpentry & Fire Prevention can assess the door and recommend suitable remedial works.
Contact CFP to discuss fire door inspections, remedial works or replacement fire doors in Poole and across Dorset.
